Fostex T50RP

From Wikiphonia

(Difference between revisions)
Jump to: navigation, search
Revision as of 03:16, 13 May 2011
Faust3d (Talk | contribs)
(Reverted edits by PhaedraCorruption (PhaedraCorruption); changed back to last version by Faust3d)
← Previous diff
Revision as of 10:16, 27 April 2012
Nikisoft (Talk | contribs)
(External Links)
Next diff →
Line 116: Line 116:
* The 'Inside' of T50RP[http://www.fostex.jp/user_file/fostex-sh/etc/t50tech.html] In Japanese. Note the finite-element analysis of the magnetic structure's flux distribution. * The 'Inside' of T50RP[http://www.fostex.jp/user_file/fostex-sh/etc/t50tech.html] In Japanese. Note the finite-element analysis of the magnetic structure's flux distribution.
 +
 +* More [http://www.registrycleanerswatch.com/registry-mechanic/ registry mechanic]
[[Category:Orthodynamic]] [[Category:Orthodynamic]]

Revision as of 10:16, 27 April 2012

Fostex T50RP v1
Enlarge
Fostex T50RP v1

Contents


Overview

Fostex T50RP v2
Enlarge
Fostex T50RP v2

The Fostex T50RP is an orthodynamic-type headphone introduced in 2002 and intended for professional audio applications. It was the first production isodynamic/orthodynamic/planar-magnetic headphone to take advantage of modern neodymium-iron-boron magnets. The design features user-replaceable diaphragms and a detachable cable compatible with all Fostex T20 and T40 models made since 1986.

The T50RP has nothing in common with the earlier (1978) T50 (v1 or v2) aside from its operating principle.

As was the case with the T50, there are two versions of this model. The early ones have thick but very lightweight earpads with a flat face and the headphone has very little bass. The second version (T50RPv2) has a thinner, rounded-face earpad (see photo) which results in a normal amount of bass and a broad midrange hump in the response curve. The newer version allows modification to flatten the response; the earlier version can only produce bass with extremely heavy bass equalization.

It's not known when Fostex made the change. We're guessing roughly summer of 2007. The only way to tell the two versions apart is earpad shape because this is the only change. Everything else is the same. Sadly, the new earpads have proven difficult to get hold of through normal retail and online channels.

Following are some excerpts from Fostex's original T50RP brochure:


Fostex T50RP v2 box
Enlarge
Fostex T50RP v2 box
Fostex T50RP v2 box rear
Enlarge
Fostex T50RP v2 box rear

1) By making the pattern of the coil a zigzag pattern, the stiffness of vertical and horizontal directions is well balanced reducing unwanted peaks in high frequencies and resulting in a very natural sound.

2) By using copper foil rather than conventional aluminium foil and by using a base film constructed of polyimide [Kapton or equivalent] instead of conventional polyester, the T50RP superbly handles high sound pressure levels with minimum distortion.


3) The design of the magnet and its neodymium construction means that the RP-Series realizes three-time more flux density than usual. In addition flux vectors are efficiently distributed inside the circuit with minimal leakage.


4) To minimize unwanted resonances and to increase rigidity, the drive unit is securely adhered to the housing by using a joint pole which has anti-vibration material bonded on its contact surfaces. High sound pressure levels are handled with ease.


General Description of the Sound

Fostex T50RP driver with damper removed
Enlarge
Fostex T50RP driver with damper removed

Unmodified, the T50RP with the revised earpads sounds warm and slightly bassy with a lower midrange hump. The treble is a bit rolled off at the very top though very detailed. After modification (damping with felt and cotton) the bass becomes tight and fast and the rest of the frequency range is much flatter. Mids still have a warm and fluid coloration to them that is in no way unpleasant to my ears.

--Faust3d 17:28, 8 December 2008 (EST)

Pricing & Other Data of Interest

$74 to $100 new.


Technical Specifications

Max Power: 3,000 mW

Frequency Response: 15 - 30,000 Hz

Impedence: 50 ohms

Sensitivity: 98 dB / mW

Cord: 3 m

Weight: 390 g


Internal driver construction, all photos by Kabeer

Modifications

There are various ways to modify Fostex T50RP, from simple felt damping to complete cup replacement. Below please find a gallery of various modifications:

Faust3D Modification

Fostex T50RP Faust3D suggested modification
Enlarge
Fostex T50RP Faust3D suggested modification

Fostex T50RP Faust3D modification is outlined in the below diagram. After this modification the sound is more balanced and transient response is greatly improved, lower frequencies tighten as ear-cup resonances are reduced.

--Faust3d 16:34, 13 January 2009 (EST)


Thunderpants Modification


Please contribute to this article
Add information as outlined in the rules













External Links

  • The 'Inside' of T50RP[1] In Japanese. Note the finite-element analysis of the magnetic structure's flux distribution.
Personal tools